Performance and reliability issues are inherent to compressed air systems, most of which can be directly attributed to water. In fact, water accounts for 99.9% of all liquid contamination found in compressed air systems. The treatment of air is therefore essential for manufacturing facilities which use compressed air as power and inquire compressed air must be dry, Refrigerated Air Dryers are an ideal choice  for general use or for non-critical applications.

Typically, air compressor Refrigerated Dryers utilize a closed loop cooling system to lower the temperature of the compressed air to just above freezing, causing condensation of water vapor. Condensed liquid is then removed by a water separator and drained away. In order to prevent condensation on the downstream distribution piping, the compressed air is re-heated by the incoming compressed air before leaving the dryer.

For general purpose compressed air applications, Refrigerated Dryers are typically equipped with cyclone water separators to reduce water vapor, liquid water, and water aerosols.

At YunAir, Refrigerated Air Dryers are designed with aluminum three-in-one heat exchangers. The refrigeration capacity will be minimized, generating increased recycling and utilization of the cold, and the total energy input power of the model can be reduced by 15-50%. 

Low pressure drop design and low absorbed power of the refrigerant circuit make air dryers a highly competitive solution with lower operating costs vs comparable dryers. And worked with the Montreal Protocol, all series models are equipped with environmentally friendly refrigerants R134 and R410A, protecting the environment.

This makes YunAir' s Refrigerated Dryers for Compressed Air Systems are energy saving, provide high moisture removal, conform to ISO 8573-1, from compressed air flow rates between 1.8- 85m³/min and maintain industry leading low operating costs.